狠狠爱在线观看福利视频高清无码

    1. <pre id="evpkf"><del id="evpkf"><menu id="evpkf"></menu></del></pre>
      1. <pre id="evpkf"><s id="evpkf"></s></pre>
        <acronym id="evpkf"></acronym>
      2. <acronym id="evpkf"><strong id="evpkf"></strong></acronym><p id="evpkf"></p>
      3. <object id="evpkf"><label id="evpkf"><menu id="evpkf"></menu></label></object>


        關閉
        點擊這里給我發消息
        點擊這里給我發消息
         +86 0512-62751429
        +86 13416743702
        Welcome to YUSH Electronic Technology Co.,Ltd.
        YUSH Electronic
          English    Chinese
        Industry Questions
        Aluminum substrate with pcb cutting machine v cut
            The aluminum plate is a metal-based CCL with outstanding heat dissipation. Typically, a single panel consists of a three-layer structure consisting of a circuit layer (copper foil), an insulating layer and a metal substrate. For high-end applications are also planning for the double-sided, structure for the circuit layer, insulation, aluminum, insulation, circuit layer. Very few applications for the multi-layer board, from the usual multi-layer board and insulation layer, aluminum-based paste.
        The advantages of aluminum plate: 1, the cooling advantage is significant; 2, the strength is very good.
        Aluminum plate shortcomings: 1, high cost; 2, now the mainstream can only do a single panel, double panel technology is difficult; 3, made of electrical strength and pressure in the more prone to problems.

              Now the projection lamp, stage lights, street lamps, mining lamps, solar lights and other high-power LED lights use more and more widely, and therefore high-power LED lamps used in the aluminum plate is also required to increase, the corresponding aluminum plate sub-board Machine equipment is also the corresponding rapid demand, but now among the shopping malls LED aluminum plate sub-board type and variety is also a variety of species, such as walking-type sub-board, take board sub-board machine, guillotine sub-board machines and other models are Can be LED aluminum plate cutting, can be on the high-power LED aluminum substrate, the main feature is thick, so the usual sub-board type to be divided, then some will not be very appropriate. Whether from the tool wear and sub-board power, etc., usually the type of sub-machine are not better to play the effect of cutting.

             Floodlights, stage lights, street lamps, mining lamps, solar lights and other high-power LED aluminum substrate life is usually 100,000 hours, high thermal conductivity, low thermal resistance. Because of the high demand for high-power LED aluminum substrates, the resolution of the thickness of the aluminum plate is thicker than usual household lighting, and is usually dominated by 3.0mm thickness and above LED aluminum substrates.

           YUSH In the professional aluminum substrate with pcb cutting machine v cut developed many years of experience, has been followed the footsteps of the mall, advancing with the times, in 2012 when the system developed a special 3.0MM thick aluminum plate, thick copper and aluminum Ultra-thick aluminum substrate with pcb cutting machine v cut-YSVJ-650, this ultra-thick aluminum substrate with pcb cutting machine v cut-YSVJ-650 Once listed, won at home and abroad Of the customer's favorite favorite, between today's LED lighting shopping malls on the day of sophistication, especially in the field of lighting a lot of demand for thick aluminum plate, together because YUSH thick aluminum foil with excellent quality , Can be said to be divided into 3.0MM thickness of the aluminum plate a lamp.

           YUSH Electronic Technology Co.,Ltd It is necessary to improve the requirements of the traditional cutting board pcb cutting machine on the basis of the pneumatic guillotine pcb cutting machine. The structure and strength of the machine, so that it can have more power and stability to cut a variety of ultra-thick aluminum plate, straight knife-style cut method can be more progress cut strength. Substrate pcb cutting machine-YSVJ-650 to introduce:


        Feature

        1.  The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place.
        2. This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.
        3. All the v-cut pcb board can be cut by this machine.
        4. Using the machine to cut, reduce stress, prevent the solder joint cracking.
        5. Pcb board is cut by multiple cutters which can cut several board once.
        6. The machine top cutter wheel can be slightly adjust:0-5mm.
        7. The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.
        8. Blade is made of SKH51 high speed steel with long service life and wear resistance.
        9. Cutting speed can be set and conveniently adjusted by turn-knob.
        10. Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.
        11. With several knives, the machine operates simply and efficiently and is suitable for mass production.

        Specification
        Power : 110V/220V AC 60HZ/50HZ
        Size: L1300*W400*H1000mm
        Weight : 285KG
        Process of cutting is unlimited
        PBC thickness: 0.8-3.0mm

        Applicable board: can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

            PCB Cutting Machine manufacturer, pcb punching machine wholesaler,pcb depanelization manufacturer, depanelize pcb wholesaler, pcb routing machines manufacturer,pcb laser cutter wholesaler,v cut machine wholesaler,PCBa cutter manufacturer,PCBa Separator wholesaler,China PCB Cutting Machine wholesaler, China pcb punching machine manufacturer,China pcb depanelization wholesaler,China depanelize pcb manufacturer,China pcb routing machines manufacturer,China pcb laser cutter manufacturer,China v cut machine exporter,China PCBa cutter manufacturer,China PCBa Separator exporter



        Product Categories
                                Location: Home -> Industry Questions

                                Aluminum substrate with pcb cutting machine v cut


                                    The aluminum plate is a metal-based CCL with outstanding heat dissipation. Typically, a single panel consists of a three-layer structure consisting of a circuit layer (copper foil), an insulating layer and a metal substrate. For high-end applications are also planning for the double-sided, structure for the circuit layer, insulation, aluminum, insulation, circuit layer. Very few applications for the multi-layer board, from the usual multi-layer board and insulation layer, aluminum-based paste.
                                The advantages of aluminum plate: 1, the cooling advantage is significant; 2, the strength is very good.
                                Aluminum plate shortcomings: 1, high cost; 2, now the mainstream can only do a single panel, double panel technology is difficult; 3, made of electrical strength and pressure in the more prone to problems.

                                      Now the projection lamp, stage lights, street lamps, mining lamps, solar lights and other high-power LED lights use more and more widely, and therefore high-power LED lamps used in the aluminum plate is also required to increase, the corresponding aluminum plate sub-board Machine equipment is also the corresponding rapid demand, but now among the shopping malls LED aluminum plate sub-board type and variety is also a variety of species, such as walking-type sub-board, take board sub-board machine, guillotine sub-board machines and other models are Can be LED aluminum plate cutting, can be on the high-power LED aluminum substrate, the main feature is thick, so the usual sub-board type to be divided, then some will not be very appropriate. Whether from the tool wear and sub-board power, etc., usually the type of sub-machine are not better to play the effect of cutting.

                                     Floodlights, stage lights, street lamps, mining lamps, solar lights and other high-power LED aluminum substrate life is usually 100,000 hours, high thermal conductivity, low thermal resistance. Because of the high demand for high-power LED aluminum substrates, the resolution of the thickness of the aluminum plate is thicker than usual household lighting, and is usually dominated by 3.0mm thickness and above LED aluminum substrates.

                                   YUSH In the professional aluminum substrate with pcb cutting machine v cut developed many years of experience, has been followed the footsteps of the mall, advancing with the times, in 2012 when the system developed a special 3.0MM thick aluminum plate, thick copper and aluminum Ultra-thick aluminum substrate with pcb cutting machine v cut-YSVJ-650, this ultra-thick aluminum substrate with pcb cutting machine v cut-YSVJ-650 Once listed, won at home and abroad Of the customer's favorite favorite, between today's LED lighting shopping malls on the day of sophistication, especially in the field of lighting a lot of demand for thick aluminum plate, together because YUSH thick aluminum foil with excellent quality , Can be said to be divided into 3.0MM thickness of the aluminum plate a lamp.

                                   YUSH Electronic Technology Co.,Ltd It is necessary to improve the requirements of the traditional cutting board pcb cutting machine on the basis of the pneumatic guillotine pcb cutting machine. The structure and strength of the machine, so that it can have more power and stability to cut a variety of ultra-thick aluminum plate, straight knife-style cut method can be more progress cut strength. Substrate pcb cutting machine-YSVJ-650 to introduce:


                                Feature

                                1.  The shaft of the knives( top and bottom) is design to be an an integral whole, it is convenient to install, pick and place.
                                2. This machine adopts computer screen control with a counting device which can be preset production. Gap of the cutting tool displayed by the display screen directly.
                                3. All the v-cut pcb board can be cut by this machine.
                                4. Using the machine to cut, reduce stress, prevent the solder joint cracking.
                                5. Pcb board is cut by multiple cutters which can cut several board once.
                                6. The machine top cutter wheel can be slightly adjust:0-5mm.
                                7. The distance between the knives can be adjusted, and it is suitable to cut single pcb board within width 15-20mm.
                                8. Blade is made of SKH51 high speed steel with long service life and wear resistance.
                                9. Cutting speed can be set and conveniently adjusted by turn-knob.
                                10. Install conveyer belt, pcb board which is cut can be sent out directly, then docking with the next machine and reducing the times of artificial pick and place. This machine can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.
                                11. With several knives, the machine operates simply and efficiently and is suitable for mass production.

                                Specification
                                Power : 110V/220V AC 60HZ/50HZ
                                Size: L1300*W400*H1000mm
                                Weight : 285KG
                                Process of cutting is unlimited
                                PBC thickness: 0.8-3.0mm

                                Applicable board: can cut LED panel, fiberboard, aluminum board (more than 400mm ) and special board.

                                    PCB Cutting Machine manufacturer, pcb punching machine wholesaler,pcb depanelization manufacturer, depanelize pcb wholesaler, pcb routing machines manufacturer,pcb laser cutter wholesaler,v cut machine wholesaler,PCBa cutter manufacturer,PCBa Separator wholesaler,China PCB Cutting Machine wholesaler, China pcb punching machine manufacturer,China pcb depanelization wholesaler,China depanelize pcb manufacturer,China pcb routing machines manufacturer,China pcb laser cutter manufacturer,China v cut machine exporter,China PCBa cutter manufacturer,China PCBa Separator exporter



                                YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                CONTACT US
                                Website:http://www.elvisandhistory.com
                                Contacts:Eva Liu +86 13416743702
                                Tel:+86-512-62751429
                                Skype:evaliuhuan
                                Email:sales@yushunli.com evaliu@hk-yush.com
                                Address: Building H, GuoRui Pioneering Park,
                                No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                Postcode:215331
                                Dongguan Factory Address: 5th Floor, No.10,
                                Shanquan Road, Yongtou Village, Chang’an Town,
                                Dongguan City, Guangdong province, China.
                                Postcode:523843
                                YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016    
                                狠狠爱在线观看福利视频高清无码
                                  1. <pre id="evpkf"><del id="evpkf"><menu id="evpkf"></menu></del></pre>
                                    1. <pre id="evpkf"><s id="evpkf"></s></pre>
                                      <acronym id="evpkf"></acronym>
                                    2. <acronym id="evpkf"><strong id="evpkf"></strong></acronym><p id="evpkf"></p>
                                    3. <object id="evpkf"><label id="evpkf"><menu id="evpkf"></menu></label></object>